BDP-SX1 firmware to version F01.R.0102
Informacije o preuzimanju
Ažuriranje je jednostavno, a s najnovijom verzijom upravljačkog softvera možete još više dobiti od svojeg Blu-ray playera.
- Datum izdavanja: 09/03/2012
- Naziv: F01.R.0102
- Modeli na koje se ovo odnosi: BDP-SX1
- Prednosti i poboljšanja:
- Disc playability improvement.
- Ovo ažuriranje uključuje tehnologiju za zaštitu sadržaja Cinavia™. Informacije o tehnologiji Cinavia nalaze se u Internetskom centru Cinavia za informiranje kupaca na http://www.cinavia.com.
- Ograničenja: samo za upotrebu s Blu-ray playerima prodanim u Europi. U svim zemljama ne prodaju se svi modeli.
Zahtjevi sustava
Vaš je upravljački softver možda već ažuriran, a naročito ako imate novi model Blu-ray playera. Ako je broj verzije F01.R.0102 ili viši, ažuriranje nije potrebno.
Ako niste sigurni, lako ćete na sljedeći način provjeriti koju verziju upravljačkog softvera imate:
- Turn on the Blu-ray player. If it starts to play a disc, press STOP and wait until you see the XrossMediaBar™ menu is displayed on the LCD panel before proceeding
- At the XrossMediaBarTM, highlight Setup > System Settings then select ENTER using the arrow keys on the remote control.
- Highlight System Information and select ENTER.
- On the LCD panel, the firmware version number looks like this:
"Software Version F01.R.0076" - if the version number is F01.R.0102 or higher, you already have the most recent firmware version.
Instalirajte
Postoje 2 jednostavna načina za ažuriranje upravljačkog softvera na Blu-ray playeru:
Sony Home Audio i Video : Učitavanje upravljačkog softwarea
Ovaj način preporučujemo jer je najlakši način ažuriranja Za njega je obično potrebno 15-30 minuta. Najprije postavite opremu, a zatim putem interneta preuzmite ažuriranje na svoj Blu-ray player.
Što vam je potrebno:
- Ethernet kabel za povezivanje Blu-ray playera s internetom
- aktivna internetska veza
Kako osigurati da ažuriranje glatko protekne
Ažuriranje je obično vrlo jednostavno. Evo kako možete postići uspješno ažuriranje od prve:
- Pažljivo pročitajte upute ili biste mogli završiti oštećivanjem svojeg Blu-ray playera.
- Ne isključujte Blu-ray player niti ga ne isključujte iz napajanja tijekom ažuriranja.
- Ne pritišćite nijednu tipku osim tipki koje su navedene u uputama.
Postavite opremu:
- Povežite LAN terminal na Blu-ray playeru na internetski izvor pomoću Ethernet kabela.
- Uključite Blu-ray player. (Ako je disk u playeru, izvadite ga.)
Dohvatite ažuriranje:
- At the XrossMediaBar TM, select Setup > Network Update using the arrow keys on the remote control and then select ENTER.
- The message Perform version update? is displayed on the LCD panel.
- Select OK using the remote control, and then press ENTER.
- The download process starts and you see the download screen on the LCD panel.
- During the download, you see the message */9"on the LCD panel. The * changes to 0 and goes up to 9 during the download process.
- After the download is complete, the update starts.
- You will see again the message "*/9"on the LCD panel. The * changes to 0 and goes up to 9 during the update process.
- When the green LED at the front of the main body turns off, the update is complete. The player automatically turns off -Don't use or turn off the player until the update is complete.
- Turn the player back on.
- Check the firmware version. If the version number is F01.R.0102, the firmware update was successful.
Mogući problemi
Što učiniti ako imate problema s ažuriranjem upravljačkog softvera Blu-ray playera putem interneta.
- The message "The batteries are insufficiently charged. Charge the batteries and try again." is displayed in the LCD panel.
Charge the batteries and try again. - The message "Connection status cannot be confirmed" shows on the LCD panel.
The problem might be with the network connection.- Check the LAN cable is connected.
- In the network settings, check you have confirmed whether or not your Blu-ray player has its own IP address. (If you use a proxy server, type the IP address of the proxy you use – instead of the proxy host name – into the Proxy Server field.)
- Try the update again.
- Tijekom ažuriranja došlo je do prekida napajanja.
Uključite player i ponovno pokušajte provesti ažuriranje. - Ažuriranje traje više od 30 minuta i još nije gotovo.
- Isključite kabel izmjenične struje iz strujne utičnice, a zatim ga nakon nekoliko minuta ponovno priključite.
- Uključite Blu-ray Disc player.
- Ponovno pokušajte provesti ažuriranje.
I dalje ne radi? Obratite se korisničkoj podršci tvrtke Sony
Informacije o datoteci
Naziv datoteke
- UPDATA_F01R0102.ZIP